Programmable Charge Current Up to 1A
No MOSFET, Sense Resistor or Blocking Diode Required
Charge Single Cell Li-Ion Battery Directly from USB Port
Trickle Current, Constant Current and Constant Voltage Operation with Thermal Regulation to Maximize Charge Rate without Overheating
<1µA Battery Quiescent Current
Preset 4.2V Battery Charge Voltage with ±1% Accuracy
Automatically Recharge
Charge Statue Indication Pins
SOP8 Package
The TMI4056 is a complete constant-current and constant-voltage linear charger for single cell Li-ion battery application.
The default battery charge voltage is fixed at 4.2V, and the charging current can be programmed by external resistor on PROG pin. The charging current could be programmed up to 1A with good system thermal design. When the charging current drops to 1/10 programmed charging current value after the BAT voltage reaching battery charge voltage, TMI4056 automatically terminates the charge cycle with charging current becomes to 0 and CHAG and STDBY pins status change. Thermal regulation function can regulate charging current to limit the die temperature during high power condition or high ambient temperature application.
When the input supply is removed, the TMI4056 automatically enters low current state with less 1μA current dropping from battery side. Its SOP8 package and less external components make TMI4056 suited for portable applications.
Portable Devices
Power Bank
Charging Docks and Cradles
Bluetooth Applications
